Laser cutting and engraving service - up to full sheet size
We've got a Flux HEXA laser cutter in our Makerspace which we’re opening up to the maker community for prototyping. While we can cut so many types of materials, this service is limited to 3mm Clear Acrylic as we always have plenty of it.
Here are the requirements for this service:
Files must be supplied as SVG and PDF format (vector image). We request two file types to help identify misconfigured SVG files prepared in Inkscape / other third-party software.
3mm Clear Acrylic Only.
Image format must be sRGB (not CMYK)
Cut lines must be 0.01mm line stroke, red (#FF0000)
Engrave areas must be black (#000000)
The design must be less than 300mm × 600mm.
We only accept fonts that are standard on a Windows 10 machine
All designs will be cut and etched as-is, we will not invert or change your design.
This service is non-refundable. If your design contains errors or omissions then they will be committed to fabrication and are subject to the constraints of laser cutting.
During checkout choose either pickup in store from Bored Owl in Unanderra, OR select shipping and provide your full address details.
After we receive your order for this service online we’ll email you to request the digital file.
We've got a Flux HEXA laser cutter in our Makerspace which we’re opening up to the maker community for prototyping. While we can cut so many types of materials, this service is limited to 3mm Clear Acrylic as we always have plenty of it.
Here are the requirements for this service:
Files must be supplied as SVG and PDF format (vector image). We request two file types to help identify misconfigured SVG files prepared in Inkscape / other third-party software.
3mm Clear Acrylic Only.
Image format must be sRGB (not CMYK)
Cut lines must be 0.01mm line stroke, red (#FF0000)
Engrave areas must be black (#000000)
The design must be less than 300mm × 600mm.
We only accept fonts that are standard on a Windows 10 machine
All designs will be cut and etched as-is, we will not invert or change your design.
This service is non-refundable. If your design contains errors or omissions then they will be committed to fabrication and are subject to the constraints of laser cutting.
During checkout choose either pickup in store from Bored Owl in Unanderra, OR select shipping and provide your full address details.
After we receive your order for this service online we’ll email you to request the digital file.
We've got a Flux HEXA laser cutter in our Makerspace which we’re opening up to the maker community for prototyping. While we can cut so many types of materials, this service is limited to 3mm Clear Acrylic as we always have plenty of it.
Here are the requirements for this service:
Files must be supplied as SVG and PDF format (vector image). We request two file types to help identify misconfigured SVG files prepared in Inkscape / other third-party software.
3mm Clear Acrylic Only.
Image format must be sRGB (not CMYK)
Cut lines must be 0.01mm line stroke, red (#FF0000)
Engrave areas must be black (#000000)
The design must be less than 300mm × 600mm.
We only accept fonts that are standard on a Windows 10 machine
All designs will be cut and etched as-is, we will not invert or change your design.
This service is non-refundable. If your design contains errors or omissions then they will be committed to fabrication and are subject to the constraints of laser cutting.
During checkout choose either pickup in store from Bored Owl in Unanderra, OR select shipping and provide your full address details.
After we receive your order for this service online we’ll email you to request the digital file.
